4 manufacturer photos · 1 / 4
Atomstack · Diode
Atomstack A20 Pro
Mid-tier Atomstack with compressed beam — sweet spot between A5 and A40
Last updated How we evaluate
What this machine is for
Mid-range Atomstack for detailed engraving & reliable thin-wood cutting
Reference benchmark same job size on every machine so you can compare times fairly.
Laser spot size
~0.08 mm compressed spot
Smaller spot = finer detail (frame motion is usually the same across tiers)
Motion precision: 0.01 mm
Sample engrave job
~10–14 min
Filled photo or logo on birch plywood
10 × 10 cm (4 × 4 in)
Sample cut job
~5–8 min
Simple square cut-out from 3 mm basswood
10 × 10 cm (4 × 4 in)
Times are estimates for the reference job above; your design complexity and settings will change them.
TL;DR
The A20 Pro sits in Atomstack's lineup between budget A5 and flagship A40. Strong engraving detail with a more rigid frame than entry models. A sensible upgrade path if A5 feels slow but A40 is over budget.
What this machine is for
Mid-tier open-frame Atomstack for detailed engraving and moderate thin-wood cutting.
Best for
Materials
Engraves
- · Wood
- · Leather
- · Slate
- · Anodized aluminum
Cuts
- · Basswood 3–6 mm
- · Black acrylic (thin)
- · Paper
- · Fabric
Cannot do
- · Clear acrylic
- · Thick hardwood reliably
- · Bare metal
- · CO₂ sign production
Pros
- ✓Better frame than A5 series
- ✓Compressed spot for finer detail
- ✓LightBurn-first workflow
- ✓Full-size 400 mm bed
- ✓Stepping stone to A40 class
Cons
- ✗Open frame safety requirements
- ✗Less community content than Ortur
- ✗20W still diode-limited on thick cuts
- ✗Air assist often extra
- ✗A40 only modestly more for power users
Beginner notes
Compare A20 Pro vs Sculpfun S30 Ultra at similar price — S30 often wins on cutting community tips; A20 wins on engraving detail for some users.
Pro tips
Atomstack's F60 air assist kit is worth adding before pushing cut depth — charring drops significantly on 5–6 mm basswood.
Pro / technical specs
Raw numbers for experienced users comparing machines.
- Laser spot size
- ~0.08 mm compressed spot
- Max speed (spec)
- 300 mm/s
- Avg engrave speed
- 75–160 mm/s fill
- Avg cut speed
- 4–11 mm/s on 3–6 mm wood
- Motion precision
- 0.01 mm