3 manufacturer photos · 1 / 3
LaserPecker · Diode
LaserPecker LP2
Classic handheld LaserPecker LP2 — portable diode engraver
Last updated How we evaluate
Released September 2021
What this machine is for
Portable LaserPecker engraving away from a full frame
Reference benchmark same job size on every machine so you can compare times fairly.
Laser spot size
~0.08 mm spot
Smaller spot = finer detail (frame motion is usually the same across tiers)
Motion precision: 0.01 mm
Sample engrave job
~12–18 min
Filled photo or logo on birch plywood
10 × 10 cm (4 × 4 in)
Sample cut job
~6–10 min
Simple square cut-out from 3 mm basswood
10 × 10 cm (4 × 4 in)
Times are estimates for the reference job above; your design complexity and settings will change them.
TL;DR
LaserPecker LP2 Classic is the earlier portable LP line before LP2 Plus — app-driven, small work area, ideal for tags and phone-case scale jobs, not workshop production.
What this machine is for
Portable personalization and small engraves.
Best for
Materials
Engraves
- · Wood
- · Leather
- · Anodized aluminum (light)
Cuts
- · Limited cutting ability
Cannot do
- · Large signs
- · Deep cutting
- · High throughput
Pros
- ✓Truly portable
- ✓LaserPecker app workflow
- ✓Low footprint
Cons
- ✗Small bed
- ✗Superseded by LP2 Plus/3/4
- ✗Premium $/capability
Beginner notes
Compare LP2 Plus if buying new — more power and desktop use.
Pro tips
Use the preview camera workflow — alignment is everything on handheld units.
Pro / technical specs
Raw numbers for experienced users comparing machines.
- Laser spot size
- ~0.08 mm spot
- Max speed (spec)
- 300 mm/s
- Avg engrave speed
- 60–150 mm/s fill
- Avg cut speed
- 4–10 mm/s on 3 mm wood
- Motion precision
- 0.01 mm