4 manufacturer photos · 1 / 4
LaserPecker · Diode
LaserPecker LP2 Plus 10W
Desktop LaserPecker LP2 Plus — 10W before LP4/LP5 era
Last updated How we evaluate
Released October 2022
What this machine is for
Desktop LaserPecker 10W for small shop personalization
Reference benchmark same job size on every machine so you can compare times fairly.
Laser spot size
~0.08 mm spot
Smaller spot = finer detail (frame motion is usually the same across tiers)
Motion precision: 0.01 mm
Sample engrave job
~12–18 min
Filled photo or logo on birch plywood
10 × 10 cm (4 × 4 in)
Sample cut job
~6–10 min
Simple square cut-out from 3 mm basswood
10 × 10 cm (4 × 4 in)
Times are estimates for the reference job above; your design complexity and settings will change them.
TL;DR
LaserPecker LP2 Plus is a 10W desktop unit in the LP lineage — more capable than LP1 pocket models but less advanced than LP4/LP5. Good used-market portable desk engraver.
What this machine is for
Small-format LaserPecker engraving for gifts and labels.
Best for
Materials
Engraves
- · Wood
- · Leather
- · Plastic
Cuts
- · Paper
- · Thin wood
Cannot do
- · Large panels
- · LP5 hybrid metal depth
Pros
- ✓LaserPecker ecosystem
- ✓Compact desktop
- ✓10W usable power
Cons
- ✗Superseded by LP4/LP5
- ✗Small area
- ✗Bluetooth-only workflow for some users
Beginner notes
Buy used only if priced well below LP4 entry.
Pro tips
Check firmware and app support before buying second-hand.
Pro / technical specs
Raw numbers for experienced users comparing machines.
- Laser spot size
- ~0.08 mm spot
- Max speed (spec)
- 300 mm/s
- Avg engrave speed
- 60–150 mm/s fill
- Avg cut speed
- 4–10 mm/s on 3 mm wood
- Motion precision
- 0.01 mm