3 manufacturer photos · 1 / 3
Monport · Fiber
Monport GT MOPA Fiber · 60W
60W Split fiber laser engraver with autofocus from Monport
All Monport models →Add to compare →
Last updated How we evaluate
Choose a power option
Details below update for the selected power option.
Showing specs for: 60W
TL;DR
Monport GT 60W MOPA Fiber is the 60W SKU on the Monport monport gt line. Monport GT 30W brings split-cabinet fiber marking with autofocus: useful for varying part heights. Verify optical power on the listing: do not assume combined-watt marketing.
Best for
What makes this machine stand out
Hardware and workflow features worth understanding before you buy : not just wattage on a label.
Entry to colour marking
The GT 60W is the least expensive GT with a MOPA source. Adjustable 2–500 ns pulses open colour on stainless, white or black marks on anodized aluminum and gentler marking on plastics.
Wide frequency range
1–3,000 kHz, against 20–80 kHz on the GT 50W. High frequencies with short pulses give smooth surface finishes; lower frequencies with longer pulses favour depth.
Our verdict
Ideal if you
Monport GT MOPA Fiber 60W fits shops that mark stainless, aluminum, and tools daily without a CO₂ bay. A solid bench option for jewelry, tags, and small batches.
Skip if you
Skip if wood, leather, or cast acrylic pay your bills. Deep metal cutting and large industrial panels often need more fiber headroom (100W) or a different machine class.
Pros
- MOPA pulse control (2–500 ns, 1–3,000 kHz): colour marking on stainless and cleaner marks on plastics
- Least expensive colour-capable model in the GT line at $4,699.99 (Monport, Oct 2026)
- Short pulses help white or black marks on anodized aluminum and limit heat on thin parts
Cons
- About $1,100 more than the GT 50W for the same 0.10 mm listed marking depth
- 175 × 175 mm field, smaller than the GT 50W's 200 × 200 mm
- Colour marking takes time on test grids: settings are not plug-and-play
What this machine is for
Maximum fiber marking speed and depth in the line
High-power fiber for metal-focused shops needing line-top throughput
Laser spot size
~0.02 mm spot
Motion precision: 0.01 mm
Sample engrave job
~3–7 min
10 × 10 cm (4 × 4 in)
Sample cut job
Not a cutter
Reference benchmark: same job size on every machine so you can compare times fairly. Times are estimates for the reference job above; your design complexity and settings will change them.
Materials
- · Stainless steel
- · Aluminum
- · Brass
- · Plastics
Accessories & add-ons
Typical inclusions and add-ons for this profile : confirm your SKU.
- Optional
Enclosure / cabinet
Third-party enclosure improves smoke control and safety
- Recommended
Laser safety glasses
~450 nm diode: OD rated for your wavelength
- Recommended
Fire extinguisher
Editorial guidance : not a live parts list. See also: Ventilation setup · Safety basics
Practical notes
Beginner notes
This profile is the 60W SKU on Monport GT MOPA Fiber. Read the TL;DR and benchmarks above, then compare other power options via the chips before buying.
Pro tips
Push speed only after depth tests on your metal alloy. Cooling and lens cleanliness matter more at this power level.
Pro / technical specsRaw numbers for experienced users comparing machines.
- Max speed (spec)
- 7,000 mm/s
- Avg engrave speed
- 500–2,000 mm/s marking
- Avg cut speed
- N/A
Common questions
Can the GT 60W MOPA do colour marking on stainless steel?
Yes. It is the entry point for colour in the GT series: the MOPA source adjusts pulse width from 2 to 500 ns and frequency from 1 to 3,000 kHz, which is what controlled oxide colours on stainless and titanium require. Expect to build your own colour test grids, since results depend on alloy, surface finish and speed.
How deep does the GT 60W engrave, and how fast?
Monport lists the same 0.10 mm maximum marking depth as the GT 50W, with 1.5 mJ pulse energy and a 10,000 mm/s top speed. In our benchmark, a filled 10 × 10 cm logo on stainless takes about 3–7 minutes. Deeper relief needs repeated passes.
GT 60W MOPA or GT 100W MOPA?
At $4,699.99 (Monport, October 2026) the 60W costs about $1,900 less than the GT 100W ($6,600 pre-order). Both share the pulse range, colour capability and 175 × 175 mm field. Choose the 100W if deep engraving (0.15 mm listed vs 0.10 mm) or cutting throughput pays your bills; for colour, plastics and black marking, the 60W covers it.
Alternatives to the Monport GT 60W MOPA Fiber
Machines in the same space, picked from our database by type, price, and score.
Gweike · Fiber · $2,799 – $3,999
Gweike G6 Split is a larger fiber marking platform with separate laser source cabinet: common format for small production. Available up to 100W; this profile covers the popular 30W tier.
ComMarker · Fiber · $3,099 – $3,966
ComMarker B6 adds MOPA fiber for color effects on stainless and finer control on deep metal engraving. Step up from B4 for shops that need color marking or faster production.
Monport · Fiber · $5,000 – $5,200
Monport GA 100W MOPA targets serious metal engraving shops needing deep marks and color on stainless. Industrial pricing and footprint: not a desktop B4-class galvo.