4 manufacturer photos · 1 / 4
Ortur · Diode (diode + IR)
Ortur H20 · 10W diode
Entry H20 chassis with integrated design and Ortur app workflow
All Ortur models →Add to compare →
Last updated How we evaluate
Released October 2023
Choose installed module
Details below match the selected module.
Showing module: 10W diode
TL;DR
Ortur H20 10W is the base diode tier on the H20 frame: faster traverse than LM3 with a more enclosed integration. Good for engraving and light cuts; step up to 20W or 40W for thicker wood.
Best for
What makes this machine stand out
Hardware and workflow features worth understanding before you buy : not just wattage on a label.
Swappable laser module
You can upgrade optical power (or add an infrared module on some lines) by swapping the laser head on the same chassis : not buying a whole new machine. Check connector compatibility and firmware before assuming your future 40W module fits today’s 10W purchase.
Open-frame : plan safety first
There is no factory enclosure: you wear OD-rated glasses, control smoke, and keep kids/pets away. You trade cabinet convenience for price and access : fine in a dedicated workshop, stressful in a living room without a plan.
LightBurn compatible
LightBurn support means advanced layers, camera tools, and workflows many makers outgrow the stock app with. Confirm your exact controller board before assuming full features : some machines need a paid license separately.
Our verdict
Ideal if you
The 10W diode module on Ortur H20 is right when you mostly engrave wood, leather, and slate and should not pay for cut watts you will not use weekly. Same chassis, upgrade path later.
Skip if you
Skip this module if you cut 5 mm+ stock daily: open the 20W or 40W profile. Cast acrylic and bare metal without spray stay frustrating on diode.
Pros
- 10W on Ortur H20: engraving-first: photo fills and leather at moderate speeds
- Swappable head on the same chassis: upgrade power without replacing the whole machine
- Integrated cabinet helps contain the beam and everyday smoke versus open-frame diodes
- Software on the profile: trial your workflow on scrap before production
Cons
- Clear cast acrylic and thick production cutting still favor CO₂, not diode power alone
- Confirm optical wattage on the listing before you buy
What this machine is for
High-quality hobby and light-business engraving with light, slow cutting
10W module · Ortur H20
Laser spot size
~0.08 × 0.09 mm
Motion precision: 0.01 mm
Sample engrave job
~28–43 min
10 × 10 cm (4 × 4 in)
Sample cut job
~14–24 min
10 × 10 cm (4 × 4 in)
Reference benchmark: same job size on every machine so you can compare times fairly. Times are estimates for the reference job above; your design complexity and settings will change them.
Materials
- · Wood
- · Leather
- · Dark acrylic
- · Anodized aluminum (light)
Accessories & add-ons
Typical inclusions and add-ons for this profile : confirm your SKU.
- Optional
Enclosure / cabinet
Third-party enclosure improves smoke control and safety
- Recommended
Laser safety glasses
~450 nm diode: OD rated for your wavelength
- Recommended
Fire extinguisher
Editorial guidance : not a live parts list. See also: Ventilation setup · Safety basics
Practical notes
Beginner notes
This profile is the 10W SKU on Ortur H20. Read the TL;DR and benchmarks above, then compare other modules via the chips before buying.
Pro tips
Run material test grids at engraving speeds first. Add air assist for light cuts on basswood. If cut jobs exceed ~30% of your week, compare the 20W or 40W module profiles before upgrading.
Pro / technical specsRaw numbers for experienced users comparing machines.
- Max speed (spec)
- 20,000 mm/s traverse
- Avg engrave speed
- 5–11 mm/s fill
- Avg cut speed
- 2–3 mm/s on 3 mm wood
Alternatives to the Ortur H20 10W
Machines in the same space, picked from our database by type, price, and score.
Ortur · Diode · $140 – $1,740
The 10W Laser Master 3 is Ortur's lower-power SKU on the same frame. Ideal for learning and engraving; cutters should choose the 20W version.
Ortur · Diode · $399 – $549
Ortur Laser Master H10 10W is the 10W SKU on the Ortur ortur laser master h10 line. The H10 is Ortur's step up from the open-frame LM3 line: a more integrated chassis with up to 20W diode power and higher advertised traverse speeds. Verify optical power on the listing: do not assume combined-watt marketing.
Sculpfun · Diode · $399 – $549
Sculpfun S10 10W launched in 2025 as a mid-size open-frame engraver with a sturdier industrial frame than S9, ~385 mm work area, and detachable laser cover. Positioned between budget S9 and S30 families for makers who want better rigidity without Ultra pricing.