4 manufacturer photos · 1 / 4
TwoTrees · Diode
TwoTrees TTS-55 Pro · 10W
10W Upgraded TTS frame with better rigidity and fixed focus
All TwoTrees models →Add to compare →
Last updated How we evaluate
Choose a power option
Details below update for the selected power option.
Showing specs for: 10W
TL;DR
TwoTrees TTS-55 Pro 10W is the 10W SKU on the TwoTrees two trees tts 55 pro line. The TTS-55 Pro improves on the base TTS-55 with stiffer frame and easier focus workflow. Verify optical power on the listing: do not assume combined-watt marketing.
Best for
What makes this machine stand out
Hardware and workflow features worth understanding before you buy : not just wattage on a label.
Compact 300 × 300 mm frame
Fits on a small desk and is easier to enclose than 400 mm-class machines; a 600 × 600 mm extension kit is available ($89).
Finer spot than the 20W
~0.09 mm in our profile against ~0.10 mm on the 20W tier, which helps on photos and small lettering.
Our verdict
Ideal if you
TwoTrees TTS-55 Pro 10W suits makers who sell marks, photos, and gifts more than daily panel cutting. Reasonable open-frame entry price.
Skip if you
Skip if you already quote 4 mm+ cutting in production: see 20W in the line. Not for cast acrylic or bare metal without spray.
Pros
- Nearly doubles the original TTS-55 Pro's 5.5W while keeping the compact 300 × 300 mm frame
- Fill speeds of 15–34 mm/s in our tests: ~18–28 min for a 10 × 10 cm photo
- ~0.09 mm spot, finer than the 20W tier on the same frame
Cons
- Small 300 × 300 mm bed limits sign and panel sizes unless you add TwoTrees' 600 × 600 mm extension kit ($89)
- Cutting stays slow: ~9–15 min for a 10 × 10 cm square in 3 mm basswood in our benchmark
- Thin basswood only in our profile, with multiple passes beyond 3 mm
What this machine is for
High-quality hobby and light-business engraving with light, slow cutting
10W module · TwoTrees TTS-55 Pro
Laser spot size
~0.09 mm spot
Motion precision: 0.01 mm
Sample engrave job
~18–28 min
10 × 10 cm (4 × 4 in)
Sample cut job
~9–15 min
10 × 10 cm (4 × 4 in)
Reference benchmark: same job size on every machine so you can compare times fairly. Times are estimates for the reference job above; your design complexity and settings will change them.
Materials
- · Wood
- · Leather
- · Slate
Accessories & add-ons
Typical inclusions and add-ons for this profile : confirm your SKU.
- Optional
Enclosure / cabinet
Third-party enclosure improves smoke control and safety
- Recommended
Laser safety glasses
~450 nm diode: OD rated for your wavelength
- Recommended
Fire extinguisher
Editorial guidance : not a live parts list. See also: Ventilation setup · Safety basics
Practical notes
Beginner notes
This profile is the 10W SKU on TwoTrees TTS-55 Pro. Read the TL;DR and benchmarks above, then compare other power options via the chips before buying.
Pro tips
Run material test grids at engraving speeds first. Add air assist for light cuts. If cut jobs exceed ~30% of your week, open the higher-watt profile on this site and compare times.
Pro / technical specsRaw numbers for experienced users comparing machines.
- Max speed (spec)
- 220 mm/s
- Avg engrave speed
- 15–34 mm/s fill
- Avg cut speed
- 2–3 mm/s on 3 mm wood
Common questions
What is the TTS-55 Pro 10W exactly?
The TTS-55 Pro launched with a 5.5W laser. The 10W version uses the same 300 × 300 mm frame with a stronger module; TwoTrees also sells the TTS-10 Pro as its current 10W machine in this family. Check which module the listing actually ships with before buying.
How thick can it cut with the 10W module?
TwoTrees publishes no per-pass chart for this tier. Our profile lists thin basswood in several passes, plus card and fabric, and our 3 mm basswood test square takes ~9–15 min at 2–3 mm/s.
10W or 20W on the TTS-55 Pro?
Keep the 10W ($249–379) for engraving gifts and occasional thin cuts. The 20W cuts our 3 mm test square in ~6–10 min and reaches 8 mm basswood; TwoTrees sells that 20W module separately for $359 (October 2026), so buying it built-in is usually cheaper than upgrading later.
Alternatives to the TwoTrees TTS-55 Pro 10W
Machines in the same space, picked from our database by type, price, and score.
Sculpfun · Diode · $270
Sculpfun S10 10W (2022) is a mid-size open-frame engraver with a sturdier industrial frame than S9, ~385 mm work area, and detachable laser cover. Positioned between budget S9 and S30 families for makers who want better rigidity without Ultra pricing.
Ortur · Diode · $130 – $210
The Aufero AL1 is Ortur's compact diode line for small work areas and portable setups. Lower power than LM3 or H10, but easier to fit on a crowded desk. Best for light engraving: not a cutting workhorse.
Ortur · Diode · $199 – $449
Ortur Laser Master 2 Pro is a discontinued Ortur classic still found used. Fine for learning if cheap; new buyers should choose LM3, H10, or H20 instead.