4 manufacturer photos · 1 / 4
TwoTrees · Diode
TwoTrees TTS-55 · 10W
10W Ultra-budget diode with surprising build quality for the price
All TwoTrees models →Add to compare →
Last updated How we evaluate
Choose a power option
Details below update for the selected power option.
Showing specs for: 10W
TL;DR
TwoTrees TTS-55 10W is the 10W SKU on the TwoTrees twotrees tts 55 line. TwoTrees undercuts Atomstack and Ortur on price while offering a usable 5. Verify optical power on the listing: do not assume combined-watt marketing.
Best for
What makes this machine stand out
Hardware and workflow features worth understanding before you buy : not just wattage on a label.
Open-frame : plan safety first
There is no factory enclosure: you wear OD-rated glasses, control smoke, and keep kids/pets away. You trade cabinet convenience for price and access : fine in a dedicated workshop, stressful in a living room without a plan.
LightBurn compatible
LightBurn support means advanced layers, camera tools, and workflows many makers outgrow the stock app with. Confirm your exact controller board before assuming full features : some machines need a paid license separately.
Our verdict
Ideal if you
TwoTrees TTS-55 10W suits makers who sell marks, photos, and gifts more than daily panel cutting. Reasonable open-frame entry price.
Skip if you
Skip if you already quote 5 mm+ cutting in production: see 20W or 40W in the line. Not for cast acrylic or bare metal without spray.
Pros
- 10W on TwoTrees TTS-55: engraving-first: photo fills and leather at moderate speeds
- Open-frame: plan laser glasses, exhaust, and workspace rules from day one
- Software on the profile: trial your workflow on scrap before production
Cons
- Clear cast acrylic and thick production cutting still favor CO₂, not diode power alone
- Confirm optical wattage on the listing before you buy
What this machine is for
High-quality hobby and light-business engraving with light, slow cutting
10W module · TwoTrees TTS-55
Laser spot size
~0.08 mm spot
Motion precision: 0.01 mm
Sample engrave job
~28–43 min
10 × 10 cm (4 × 4 in)
Sample cut job
~14–24 min
10 × 10 cm (4 × 4 in)
Reference benchmark: same job size on every machine so you can compare times fairly. Times are estimates for the reference job above; your design complexity and settings will change them.
Materials
- · Wood
- · Leather
- · Slate
- · Anodized aluminum (light)
Accessories & add-ons
Typical inclusions and add-ons for this profile : confirm your SKU.
- Optional
Enclosure / cabinet
Third-party enclosure improves smoke control and safety
- Recommended
Laser safety glasses
~450 nm diode: OD rated for your wavelength
- Recommended
Fire extinguisher
Editorial guidance : not a live parts list. See also: Ventilation setup · Safety basics
Practical notes
Beginner notes
This profile is the 10W SKU on TwoTrees TTS-55. Read the TL;DR and benchmarks above, then compare other power options via the chips before buying.
Pro tips
Run material test grids at engraving speeds first. Add air assist for light cuts. If cut jobs exceed ~30% of your week, open the higher-watt profile on this site and compare times.
Pro / technical specsRaw numbers for experienced users comparing machines.
- Max speed (spec)
- 200 mm/s
- Avg engrave speed
- 3–8 mm/s fill
- Avg cut speed
- 2–3 mm/s on 2–3 mm wood
Alternatives to the TwoTrees TTS-55 10W
Machines in the same space, picked from our database by type, price, and score.
Creality · Diode · $149 – $249
Creality Falcon 5W is the small CR-Laser Falcon for desktop engraving and light crafts: lower power than Falcon 10W/A1 but simpler footprint and price.
Ortur · Diode · $110 – $210
The Aufero AL1 is Ortur's compact diode line for small work areas and portable setups. Lower power than LM3 or H10, but easier to fit on a crowded desk. Best for light engraving: not a cutting workhorse.
Ortur · Diode · $199 – $449
Ortur Laser Master 2 Pro is a discontinued Ortur classic still found used. Fine for learning if cheap; new buyers should choose LM3, H10, or H20 instead.