4 manufacturer photos · 1 / 4
LaserPecker · Diode
LaserPecker LP1 Plus
LaserPecker LP1 Plus — pocket engraver step above LP1 Pro
Last updated How we evaluate
Released March 2022
What this machine is for
Compact LaserPecker for maximum portability
Reference benchmark same job size on every machine so you can compare times fairly.
Laser spot size
~0.08 mm spot
Smaller spot = finer detail (frame motion is usually the same across tiers)
Motion precision: 0.01 mm
Sample engrave job
~12–18 min
Filled photo or logo on birch plywood
10 × 10 cm (4 × 4 in)
Sample cut job
~6–10 min
Simple square cut-out from 3 mm basswood
10 × 10 cm (4 × 4 in)
Times are estimates for the reference job above; your design complexity and settings will change them.
TL;DR
LaserPecker LP1 Plus sits between LP1 Pro and LP2 in the pocket line — still ultra-compact, app-first, for jewelry-scale and travel engraving rather than sheet goods.
What this machine is for
Pocket engraving and learning on LaserPecker.
Best for
Materials
Engraves
- · Wood
- · Leather
- · Plastic
- · Some metals (coated)
Cuts
- · Limited cutting ability
Cannot do
- · Large work
- · Production cutting
Pros
- ✓Smallest LaserPecker tier
- ✓Simple app
- ✓Gift-friendly
Cons
- ✗Low power vs LP3/4/5
- ✗Tiny field
- ✗Older SKU
Beginner notes
Buy LP3 or LP4 if you want current-generation optics and speed.
Pro tips
Third-party stands help stability vs pure handheld mode.
Pro / technical specs
Raw numbers for experienced users comparing machines.
- Laser spot size
- ~0.08 mm spot
- Max speed (spec)
- 300 mm/s
- Avg engrave speed
- 60–150 mm/s fill
- Avg cut speed
- 4–10 mm/s on 3 mm wood
- Motion precision
- 0.01 mm