4 manufacturer photos · 1 / 4
Sculpfun · Diode
Sculpfun S30 Pro 10W
Mid Sculpfun S30 Pro — 10W on the S30 frame family
Last updated How we evaluate
Released June 2022
What this machine is for
Affordable S30-frame Sculpfun for engraving-first work
Reference benchmark same job size on every machine so you can compare times fairly.
Laser spot size
~0.08 mm spot
Smaller spot = finer detail (frame motion is usually the same across tiers)
Motion precision: 0.01 mm
Sample engrave job
~12–18 min
Filled photo or logo on birch plywood
10 × 10 cm (4 × 4 in)
Sample cut job
~6–10 min
Simple square cut-out from 3 mm basswood
10 × 10 cm (4 × 4 in)
Times are estimates for the reference job above; your design complexity and settings will change them.
TL;DR
Sculpfun S30 Pro 10W is the lower-power S30 Pro SKU — same frame class as Pro Max but less cutting depth. Good budget Sculpfun if you don't need 20W.
What this machine is for
Mid-budget Sculpfun engraving on 400 mm bed.
Best for
Materials
Engraves
- · Wood
- · Leather
- · Paper
Cuts
- · 3 mm basswood
Cannot do
- · Thick cutting
- · Ultra-tier speeds
Pros
- ✓S30 frame ecosystem
- ✓Large bed
- ✓Upgrade path within Sculpfun
Cons
- ✗10W limits
- ✗Pro Max/Ultra more common in forums now
Beginner notes
Skip if you already know you'll want 20W within months.
Pro tips
Shares many S30 community tips — search S30 Pro for mods.
Pro / technical specs
Raw numbers for experienced users comparing machines.
- Laser spot size
- ~0.08 mm spot
- Max speed (spec)
- 300 mm/s
- Avg engrave speed
- 60–150 mm/s fill
- Avg cut speed
- 4–10 mm/s on 3 mm wood
- Motion precision
- 0.01 mm