5 manufacturer photos · 1 / 5
Monport · Fiber
Monport GPro Vision MOPA · 100W
Split MOPA fiber with 16 MP camera and autofocus: more power for deep engraving and relief
All Monport models →Add to compare →
Last updated How we evaluate
Released June 2026
Choose a power option
Details below update for the selected power option.
Showing specs for: 100W
TL;DR
The GPro Vision 100W MOPA keeps the line's 16 MP camera, autofocus and 175 × 175 mm field with a 100W MOPA source for deeper engraving, 3D relief and thin-sheet cutting, alongside colour marking. $6,919.99 on Monport's store in October 2026, shown without a shipping delay. Launched in June 2026; no independent review yet.
Best for
What makes this machine stand out
Hardware and workflow features worth understanding before you buy : not just wattage on a label.
Depth and relief
The 100W MOPA source makes deep engraving, 3D embossing and thin-sheet cutting practical in production times, while keeping MOPA colour control.
Built for repeat production
Camera placement, autofocus and compatibility with Monport's conveyor accessory suit serialized parts and repeated logos.
Our verdict
Ideal if you
The 100W tier suits shops that sell deep engraving, relief work, tool marking and small metal cut-outs, and want the camera to cut setup time on finished goods.
Skip if you
The extra power costs about $1,600 over the cheaper MOPA tier with no larger field. It is more than colour-only or light marking work needs, and it still requires an enclosure or strict eye protection.
Pros
- Faster material removal for deep engraving, relief and embossing, with MOPA colour marking still available
- Camera placement and autofocus for repeat parts and batch layouts
- Shown without a shipping delay on Monport's store in October 2026
Cons
- $6,919.99: about $320 more than Monport's camera-less GT at the same power ($6,600)
- More heat on thin parts: colour work needs careful parameter tests
What this machine is for
Deep metal engraving and relief work with camera placement
100W MOPA fiber · Monport GPro Vision
Laser spot size
0.01 mm
Motion precision: 0.01 mm
Sample engrave job
~2–4 min
10 × 10 cm (4 × 4 in)
Sample cut job
—
Reference benchmark: same job size on every machine so you can compare times fairly. Times are estimates for the reference job above; your design complexity and settings will change them.
Materials
- · Stainless steel
- · Aluminum (bare and anodized)
- · Brass & copper
- · Titanium
- · Gold & silver
- · Plastics
- · Stone & leather
Accessories & add-ons
Typical inclusions and add-ons for this profile : confirm your SKU.
- Optional
Enclosure / cabinet
Third-party enclosure improves smoke control and safety
- Included
Laser safety glasses
~450 nm diode: OD rated for your wavelength
- Recommended
Fire extinguisher
Editorial guidance : not a live parts list. See also: Ventilation setup · Safety basics
Practical notes
Beginner notes
This profile is the 100W MOPA tier of the GPro Vision. Buy it when depth and throughput pay the bills; for colour and fine marking alone, compare the lower tiers via the chips.
Pro tips
Use several fast passes rather than one slow pass for deep engraving, to limit heat build-up and warping on thin parts. Keep the lens clean: at this power, dirt burns in quickly.
Pro / technical specsRaw numbers for experienced users comparing machines.
- Max speed (spec)
- 10 000 mm/s
- Avg engrave speed
- ~800–2 500 mm/s
- Avg cut speed
- —
Common questions
GPro Vision 100W or GT 100W?
Both use a 100W MOPA source and autofocus. The GPro Vision 100W ($6,919.99, October 2026) adds the 16 MP camera and conveyor compatibility; the GT 100W was listed from $6,600. If you mark mostly flat stock positioned with jigs, the GT is enough; for varied finished parts, the camera earns its cost.
What can the 100W MOPA do that the 60W cannot?
Nothing different in kind, but it does it faster: deeper engraving per pass, quicker 3D relief and embossing, and more practical cutting of thin steel or brass. Monport does not publish cutting thicknesses for this tier; expect thin sheet only, in many passes.
Do I need an enclosure for the GPro Vision?
It is an open split galvo with a Class 4 beam. Monport includes OD7 glasses and sells an enclosure with a door safety switch ($509 in October 2026). In a shared room or a shop with visitors, the enclosure is the safer choice; fume extraction is also recommended for coated metals and plastics.
Alternatives to the Monport GPro Vision 100W MOPA
Machines in the same space, picked from our database by type, price, and score.
Monport · Fiber · $6,600 – $7,050
Monport GT 100W Fiber is the 100W SKU on the Monport monport gt line. Monport GT 30W brings split-cabinet fiber marking with autofocus: useful for varying part heights. Verify optical power on the listing: do not assume combined-watt marketing.
Gweike · Fiber · $4,999 – $6,999
Gweike G6 Split 100W is the 100W SKU on the Gweike gweike g6 split line. Gweike G6 Split is a larger fiber marking platform with separate laser source cabinet: common format for small production. Verify optical power on the listing: do not assume combined-watt marketing.
Monport · Fiber · $5,000 – $5,200
Monport GA 100W MOPA targets serious metal engraving shops needing deep marks and color on stainless. Industrial pricing and footprint: not a desktop B4-class galvo.