5 manufacturer photos · 1 / 5
Monport · Fiber
Monport GPro Vision MOPA · 200W
Split MOPA fiber with 16 MP camera: top power and 22,000 mm/s for production work
All Monport models →Add to compare →
Last updated How we evaluate
Released June 2026
Choose a power option
Details below update for the selected power option.
Showing specs for: 200W
TL;DR
The GPro Vision 200W MOPA is the top of the line: a 200W MOPA source, a galvo listed at 22,000 mm/s (against 10,000 mm/s on the other tiers), the 16 MP camera, autofocus and a 175 × 175 mm field. $8,599 on Monport's store in October 2026, listed for late-October shipping. Aimed at production work and deep metal processing; no independent review yet.
Best for
What makes this machine stand out
Hardware and workflow features worth understanding before you buy : not just wattage on a label.
22,000 mm/s galvo
Monport lists more than twice the scanning speed of the other GPro Vision tiers, which shortens fill-heavy jobs.
The most power in the line
The strongest source in Monport's camera-equipped split fiber range, for deep engraving, relief and thin-metal cutting.
Our verdict
Ideal if you
The 200W tier turns the GPro Vision into a production tool: deep engraving, embossing and thin-metal cutting at speeds the lower tiers cannot match, with camera placement for continuous batches.
Skip if you
It is expensive for a 175 × 175 mm field, ships later than most tiers, and its power is wasted on colour, jewelry or light marking. No independent review yet, and Monport's product page gives few details on electrical and cooling requirements.
Pros
- Fastest tier: 22,000 mm/s galvo speed listed by Monport
- Top MOPA power for deep engraving, relief and thin-metal cutting in production times
- Camera placement and conveyor compatibility for continuous batches
Cons
- $8,599 (Monport, Oct 2026): the highest price in the line for the same 175 × 175 mm field
- Listed for late-October shipping in October 2026
- Too much power for fine colour work on thin parts without careful tuning
What this machine is for
High-throughput metal marking, deep engraving and cutting with camera placement
200W MOPA fiber · Monport GPro Vision
Laser spot size
0.01 mm
Motion precision: 0.01 mm
Sample engrave job
~1–3 min
10 × 10 cm (4 × 4 in)
Sample cut job
—
Reference benchmark: same job size on every machine so you can compare times fairly. Times are estimates for the reference job above; your design complexity and settings will change them.
Materials
- · Stainless steel
- · Aluminum (bare and anodized)
- · Brass & copper
- · Titanium
- · Gold & silver
- · Plastics
- · Stone & leather
Accessories & add-ons
Typical inclusions and add-ons for this profile : confirm your SKU.
- Optional
Enclosure / cabinet
Third-party enclosure improves smoke control and safety
- Included
Laser safety glasses
~450 nm diode: OD rated for your wavelength
- Recommended
Fire extinguisher
Editorial guidance : not a live parts list. See also: Ventilation setup · Safety basics
Practical notes
Beginner notes
This profile is the 200W MOPA tier of the GPro Vision, a production machine. Compare the lower tiers via the chips first: most small shops do not need this much power.
Pro tips
Start from reduced power and raise it gradually when building parameters: at this level, thin parts warp and colours shift quickly. Plan fume extraction and an enclosure from day one.
Pro / technical specsRaw numbers for experienced users comparing machines.
- Max speed (spec)
- 22 000 mm/s
- Avg engrave speed
- ~1 000–4 000 mm/s
- Avg cut speed
- —
Common questions
Who needs the 200W tier?
Shops paid by throughput: deep engraving, embossing, heavy serial marking and small metal cut-outs in volume. Monport lists a 22,000 mm/s maximum speed for this tier against 10,000 mm/s for the others. For gifts, jewelry or colour marking, a lower tier is better value.
Is the GPro Vision 200W available now?
In October 2026 Monport listed it with a late-October shipping note at $8,599 ($8,799 with LightBurn Pro), so it is effectively a pre-order. Check the current note before ordering.
200W or 100W MOPA?
Both share the camera, autofocus and 175 × 175 mm field. The 200W ($8,599) doubles the source power and lists 22,000 mm/s instead of 10,000 mm/s, for about $1,680 more than the 100W ($6,919.99). It pays off when deep engraving or cutting runs for hours every day.
Alternatives to the Monport GPro Vision 200W MOPA
Machines in the same space, picked from our database by type, price, and score.
Monport · Fiber · $6,600 – $7,050
Monport GT 100W Fiber is the 100W SKU on the Monport monport gt line. Monport GT 30W brings split-cabinet fiber marking with autofocus: useful for varying part heights. Verify optical power on the listing: do not assume combined-watt marketing.
Gweike · Fiber · $4,999 – $6,999
Gweike G6 Split 100W is the 100W SKU on the Gweike gweike g6 split line. Gweike G6 Split is a larger fiber marking platform with separate laser source cabinet: common format for small production. Verify optical power on the listing: do not assume combined-watt marketing.
Monport · Fiber · $5,000 – $5,200
Monport GA 100W MOPA targets serious metal engraving shops needing deep marks and color on stainless. Industrial pricing and footprint: not a desktop B4-class galvo.